Anthony DCT Liftgate Parts Diagrams
Anthony DCT liftgate parts lookup
Use this Anthony DCT liftgate parts diagram page to identify OEM components, review part callouts, and verify replacement liftgate parts.
Compatibility and Purchasing Notice
Although the information on this page is taken from an OEM lift gate manual, if you're unsure whether this data matches your exact model and year, PLEASE contact our team. Part numbers can vary by year - even within the same model - and we're always happy to confirm the correct parts for you.
Have your liftgate serial number ready for faster assistance. Where to find it
i
3. Standard Floor Extension, Dock Bumpers, and Decals
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | ATU-5130 | WELDMENT, FLOOR EXTENSION, (1/4"- 96"X12") | |
| 2 | 1 | ATU-5128 | WELDMENT, FLOOR EXTENSION, (3/16"- 96"X12") | |
| 3 | 1 | ATU-5142 | WELDMENT, FLOOR EXTENSION, (3/16"- 102"X12") | |
| 4 | 1 | ATU-5186 | WELDMENT, FLOOR EXTENSION, (1/4"- 102"X12") | |
| 5 | 1 | ATU-5288 | WELDMENT, FLOOR EXTENSION, (1/4"- 96"X18") | |
| 6 | 1 | ATU-5287 | WELDMENT, FLOOR EXTENSION, (1/4"- 102"X18") | |
| 7 | 1 | ATU-867 | DOCK BUMPER SET WITH 20" PADS & GUSSETS (102" ONLY) | |
| 8 | 1 | A-140063 | WELDMENT, DOCK BUMPER, LEFT | |
| 9 | 2 | ATU-200 | GUSSET, DOCK BUMPER | |
| 10 | 1 | A-140062 | WELDMENT, DOCK BUMPER, RIGHT | |
| 11 | 2 | A-140116 | GROMMET, RUBBER | |
| 12 | 8 | A-132301 | 1/2-13 NYLOCK GR8 NUT ZP | |
| 13 | 2 | ATU-798 | PAD, DOCK BUMPER, 20" | |
| 14 | 8 | A-150065 | 1/2" FLAT WASHER, ZP | |
| 15 | 8 | ATU-259 | 1/2-13 X 2.0 GR8 HEX BOLT ZP | |
| 16 | 1 | A-131054 | URGENT WARNING DECAL | |
| 17 | 1 | A-131135 | OPERATING INSTRUCTIONS DECAL | |
| 18 | 1 | A-131057 | WELD WARNING DECAL | |
| 19 | 1 | A-131061 | 2500 LBS. MAXIMUM CAPACITY DECAL | |
| 19 | 1 | A-131136 | 3300 LBS. MAXIMUM CAPACITY DECAL | |
| 20 | 1 | A-131115 | WARNING PERSONAL INJURY HAZARD DECAL | |
| 21 | 1 | A-131056 | DISENGAGE LATCH BEFORE USING LIFTGATE | |
| 22 | 1 | A-131053 | AFTER USING LIFTGATE, SECURE LATCH DECAL | |
| 23 | 1 | A-131058 | LIFTGATE FUSE CHANGING PROCEDURE | |
| 24 | 1 | A-150601 | FLAG — MADE IN THE USA | |
| 25 | 2 | 3139 | 1/2-13 HEX NUT GR8 ZP | |
| 26 | 2 | A-132085 | 1/2-13 X 1.0 GR8 HEX BOLT | |
| 27 | 2 | A-140959 | INSTALL BRACKET W/M |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
4. Dock Bumper Sets
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | A-140112 | DOCK BUMPER SET WITH GUSSETS, NO PADS (102" ONLY) | ||
| 1 | A-140430 | DOCK BUMPER SET WITH PADS AND GUSSETS (102" ONLY) 16" DEEP | ||
| 1 | A-140452 | DOCK BUMPER SET WITH PADS AND GUSSETS (96" ONLY) WALKRAMP | ||
| 1 | A-140547 | XD DOCK BUMPER SET WITH FLEXI-STEP, UHMW PADS AND GUSSETS (96" ONLY) | ||
| 1 | A-140548 | XD DOCK BUMPER SET WITH UHMW PADS AND GUSSETS (96" ONLY) | ||
| 1 | A-140555 | XD DOCK BUMPER SET WITH FLEXI-STEP, UHMW PADS AND GUSSETS (102" ONLY) | ||
| 1 | A-140681 | XD DOCK BUMPER SET WITH 20" PADS AND GUSSETS (102" ONLY) | ||
| 1 | A-140690 | XD DOCK BUMPER SET WITH 20" PADS AND GUSSETS (102" ONLY) 18" DEEP | ||
| 1 | A-140721 | DOCK BUMPER SET WITH 20" PADS AND GUSSETS (102" ONLY) 18" DEEP | ||
| 1 | A-140743 | DOCK BUMPER SET WITH EXTENSION PRE-WELDED, WITH PADS AND GUSSETS | ||
| 1 | A-140762 | DOCK BUMPER SET WITH FLEXI-STEP, 20" PADS AND GUSSETS (102" ONLY) | ||
| 1 | A-140772 | DOCK BUMPER SET WITH PADS AND GUSSETS (96" ONLY) | ||
| 1 | A-140793 | DOCK BUMPER SET WITH EXTENSION PRE-WELDED, WITH PADS AND GUSSETS | ||
| 1 | A-140897 | DOCK BUMPER SET WITH UHMW PADS AND GUSSETS (102" ONLY) | ||
| 1 | A-140898 | XD DOCK BUMPER SET WITH UHMW PADS AND GUSSETS (102" ONLY) | ||
| 1 | A-140899 | DOCK BUMPER SET WITH LIGHTS, PADS, AND GUSSETS (102" ONLY) | ||
| 1 | A-140913 | XD DOCK BUMPER SET WITH EXTENSION PRE-WELDED, WITH PAD AND GUSSETS | ||
| 1 | A-140920 | DOCK BUMPER SET WITH PADS AND GUSSETS (96" ONLY) | ||
| 1 | A-140939 | DOCK BUMPER 1-STEP WITH FLEXI-STEP SET WITH PADS AND GUSSETS (102" ONLY) 12" DEEP | ||
| 1 | A-140940 | DOCK BUMPER 1-STEP WITH FLEXI-STEP SET WITH PADS AND GUSSETS (102" ONLY) 16" DEEP | ||
| 1 | A-140966 | DOCK BUMPER SET FOR LIGHTS, PADS, AND GUSSETS (102" ONLY) | ||
| 1 | A-141012 | DOCK BUMPER SET WITH PADS AND GUSSETS (102" ONLY) 22" DEEP, 3-STEPS | ||
| 1 | ATU-1470 | DOCK BUMPER SET WITH FLEXI-STEP, 8" PADS AND GUSSETS (96" ONLY) | ||
| 1 | ATU-867 | DOCK BUMPER SET WITH 20" PADS AND GUSSETS (102" ONLY) | ||
| 1 | SG-1086 | DOCK BUMPER SET WITH 8" PADS - SONAR COMPATIBLE (102" ONLY) |
i
5. Walk Ramp Floor Extension
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | ATU-5260 | WELDMENT, FLOOR EXTENSION, DCT-WR 96" | |
| 2 | 1 | ATU-5261 | WELDMENT, FLOOR EXTENSION, DCT-WR 102" | |
| 3 | 1 | ATU-5260-G | WELDMENT, FLOOR EXTENSION, DCT-WR 96" GALVANIZED | |
| 4 | 1 | ATU-5261-G | WELDMENT, FLOOR EXTENSION, DCT-WR 102" GALVANIZED | |
| 5 | 1 | A-140442 | WALKRAMP GUIDE - STREETSIDE | |
| 6 | 1 | A-140441 | WALKRAMP GUIDE - CURBSIDE | |
| 7 | 2 | AR-18-229 | PLASTIC SLIDE | |
| 8 | 4 | A-132030 | RIVET | |
| 9 | 2 | 3139 | 1/2-13 HEX NUT GR8 ZP | |
| 10 | 2 | A-132085 | 1/2-13 X 1.0 GR8 HEX BOLT | |
| 11 | 2 | A-140959 | INSTALL BRACKET W/M | |
| 12 | 1 | ATU-1506 | ALUMINUM ANTHONY NAMEPLATE | |
| 13 | 6 | A-132325 | 1/8" ALUM RIVET, .188-.250 GRIP | |
| 14 | 1 | A-140464 | WALKRAMP SUPPORT WELDMENT | |
| 15 | 4 | 862 | 5/16-18 LOCKNUT | |
| 16 | 4 | A-132326 | 5/16-18 X 2.5" FH S/C/S ZP | |
| 17 | 2 | A-132331 | 1/2-13 x 1.5" FH S/C/S ZP | |
| 18 | 2 | A-140437 | WALKRAMP GLIDE PAD | |
| 19 | 2 | A-140466 | RAMP GUIDE-PLASTIC | |
| 20 | 2 | A-140463 | WALKRAMP STOP BUSHING | |
| 21 | 2 | A-132301 | 1/2-13 NYLOCK GR8 NUT ZP | |
| 22 | 1 | A-140475 | WR LATCH KIT | |
| 23 | 4 | A-132024 | 1/2-13 LOCKNUT | |
| 24 | 4 | S-047004 | 1/4-20 X 1" SLOTTED RDHD M/S ZP | |
| 25 | 2 | A-140090 | WEAR PAD/BUMPER | |
| 26 | 4 | 2051 | 1/4" F/W ZP | |
| 27 | 4 | ATU-359 | 1/4-20 TOP L/N GR. C ZP | |
| 28 | 8 | A-150065 | 1/2" SAE F/W 17/32" ID X 1-1/16" OD ZP | |
| 29 | 4 | ATU-259 | 1/2-13 X 2" H/H C/S GR. 8 ZP |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
6. Pump Box Assembly
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | ATU-5188 | POWER UNIT ASSY- DCT P/D 2500# | |
| 2 | 1 | ATU-5189 | POWER UNIT ASSY- DCT G/D 2500# | |
| 3 | 1 | ATU-5328 | POWER UNIT ASSY- DCT G/D 2500# W/ LVC | |
| 4 | 1 | ATU-5204 | POWER UNIT ASSY- DCT P/D 3300# | |
| 5 | 1 | ATU-5285 | POWER UNIT ASSY- DCT P/D 3300# HAND R/C | |
| 6 | 1 | ATU-5203 | POWER UNIT ASSY- DCT G/D 3300# | |
| 7 | 1 | ATU-5245 | POWER UNIT ASSY- DCT G/D 3300# HAND R/C | |
| 8 | 2 | 764 | 3/8-16 X 3/4" H/H C/S GR.8 YZP | |
| 9 | 2 | 2064 | 3/8-16 REVERSIBLE HEX L/N ZP | |
| 10 | 1 | ATU-533 | PUMP BOX COVER | |
| 11 | 1 | ATU-531 | PUMP BOX RIVETED ASSEMBLY | |
| 12 | 1 | A-133516 | DCT GROUNDING STRAP (not necessary if pump box is grounder to adapter frame) | |
| 13 | 2 | A-132011 | 3/8" EXT HD STAR L/W ZP | |
| 14 | 4 | 2058 | 3/8 FLAT WASHER | |
| 15 | 3 | 2054 | 3/8 LOCK WASHER | |
| 16 | 4 | 874 | 3/8-16 X 1" H/H C/S GR.8 ZP |
i
7. Hydraulic Power Pack
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | A-133105 | POWER CABLE WITH 200A FUSE ASSY | |
| 2 | 2 | A-133048 | BOOT, WEATHER SEAL, RUBBER | |
| 3 | 2 | A-150608 | #2 RED POWER CABLE (30" AND 30' PIECES) | |
| 4 | 2 | A-150990 | HEAT SHRINK TUBING | |
| 5 | 2 | A-133003 | 3/8" ANTI-ROTATIONAL LUG | |
| 6 | 1 | A-133063 | FUSE, 200A | |
| 7 | 1 | A-133062 | FUSE HOLDER, IN-LINE | |
| 8 | 1 | A-131036 | WIRE DECAL: FUSE REPLACEMENT INSTRUCTIONS | |
| 9 | 2 | A-132079 | CABLE TIE, 8" | |
| 10a | 1 | A-133553 | SWITCH ASSY: POWER DOWN SWITCH ASSY W/CABLE, PLASTIC BOX (2.5 X 3 X 1) | |
| 10b | 1 | A-133579 | SWITCH ASSY: POWER DOWN SWITCH ASSY W/CABLE, PLASTIC BOX (2.5 X 3 X 1) | |
| 10c | 1 | ATU-1219 | SWITCH ASSY: POWER DOWN SWITCH ASSY W/CABLE, PLASTIC BOX (2.5 X 3 X 1) | |
| 11 | 1 | ATU-1221 | SWITCH: NEW STYLE PLASTIC BOX AND SWITCH, NO CABLE | |
| 12a | 1 | ATU-307 | SWITCH ONLY: RAISE/LOWER TOGGLE (POTTED ASSY) | |
| 12b | 1 | A-150477 | SWITCH ONLY: RAISE/LOWER TOGGLE (POTTED ASSY) | |
| 13 | 1 | ATU-1215 | PLASTIC SWITCH BOX | |
| 14 | 1 | A-133068 | RUBBER SWITCH COVER | |
| 15 | 1 | A-150438 | FUSE, 10A | |
| 16 | 1 | A-131001 | DECAL: 10A FUSE & HOLDER | |
| 17a | 1 | A-130166 | POWER PACK UNIT (COMPLETE, 3000LB CAPACITY), POWER DOWN | |
| 17b | 1 | A-130116 | POWER PACK UNIT, COMPLETE, GRAVITY DOWN | |
| 17c | 1 | A-130214 | POWER PACK UNIT (COMPLETE, 4000-6000LB CAPACITY), POWER DOWN | |
| 17d | 1 | A-130394 | POWER PACK UNIT, COMPLETE, GRAVITY DOWN | |
| 18 | 2 | A-130140 | FITTING: 90DEG ADAPTER (MALE SAE#6 TO MALE JIC#6) | |
| 19 | 2 | A-130142 | FITTING: 90DEG ELBOW (MALE JIC#6 TO FEMALE JIC#6) | |
| 20 | 1 | A-130153 | TEE FITTING: 06MJ-06MJ-06FJ | |
| 21 | 1 | A-150470 | CABLE CLAMP | |
| 22 | 1 | A-130036 | TEE FITTING, 1/4" BARBED | |
| 23 | 1 | A-133504 | SWITCH — LOW VOLTAGE | |
| 24 | 1 | ATU-786 | MOUNTING BRACKET | |
| 25a | 1 | A-133097 | REMOTE CONTROL KIT, COMPLETE | |
| 25b | 1 | A-133581 | REMOTE CONTROL KIT, COMPLETE | |
| 26a | 1 | ATU-250 | REMOTE CONTROL HANDSET W/CABLE | |
| 26b | 1 | AR-18-172 | REMOTE CONTROL HANDSET W/CABLE | |
| 27a | 1 | ATU-407 | REMOTE CONTROL RECEPTACLE W/CABLE | |
| 27b | 1 | A-133580 | REMOTE CONTROL RECEPTACLE W/CABLE | |
| 28 | 1 | A-130212 | HYDRAULIC HOSE W/FITTINGS | |
| 29 | 1 | A-133351 | WIRE HARNESS | |
| 30 | 1 | A-133350 | WIRE HARNESS | |
| 31 | 1 | A-150015 | FILTER NIPPLE | |
| 32 | 1 | A-150016 | FILTER SCREEN | |
| 33 | 1 | A-130433 | DUAL LEAD COIL (130116,117,394,419 PU) | |
| 33 | 1 | A-130434 | DUAL LEAD COIL 24V (130118 PU) | |
| 33 | 1 | A-130435 | DUAL LEAD COIL (130166, 214 PU) | |
| 34 | 1 | A-130436 | LOWER VALVE 2W/2P (130116-118 243, 394 PU) | |
| 34 | 1 | A-130437 | LOWER VALVE 2W/2P (130166,214 PU) | |
| 35 | 1 | A-130438 | RAISE VALVE 4W/2P (130117 PU) | |
| 35 | 1 | A-130439 | RAISE VALVE 4W/2P (130166, 214 PU) |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
8. Adapter Frame Mounting Assembly
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 4 | A-132026 | 1/4" X 1-1/2" LG COTTER PIN, 18-8 SS | |
| 2 | 2 | ATU-102 | PIN, CYLINDER DEAD END MOUNT | |
| 3 | 2 | ATU-358 | 1/4"-20 x 2.0" H/C/S ZP | |
| 4 | 2 | ATU-359 | 1/4-20 TOP L/N GR. C ZP | |
| 5 | 8 | A-132027 | 1/4" X 2-1/4" LG COTTER PIN, 18-8 SS | |
| 6 | 2 | ATU-5010 | PIN, RADIUS ARM TO ADAPTER | |
| 7 | 6 | ATU-428 | SERVICE FREE BUSHING 1.50 OD X 1.25 ID X 1.00 | |
| 8 | 8 | ATU-134 | 1-7/8" OD X 1-17/64" ID X 10 GA BUSHING | |
| 9 | 2 | ATU-5011 | PIN, LIFTFRAME TO ADAPTER | |
| 10 | 1 | ATU-5001 | ADAPTER FRAME WELDMENT: DCT | |
| 10 | 1 | ATU-5001-G | ADAPTER FRAME WELDMENT: DCT, GALVANIZED | |
| 10 | 1 | ATU-5002 | ADAPTER FRAME WELDMENT W/ HITCH: DCT | |
| 10 | 1 | ATU-5002-G | ADAPTER FRAME WELDMENT W/ HITCH: DCT, GALVANIZED | |
| 11 | 12 | A-132340 | 3/4-10 X 2.5" HEX BOLT GR. 8 | |
| 12 | 2 | ATU-5202 | BOLT-ON MOUNTING PLATE WELDMENT | |
| 13 | 6 | ATU-5200 | ADAPTER FRAME BOLT-ON SPACER | |
| 14 | 12 | A-132323 | 3/4-10 NYLOCK NUT | |
| 15 | 1 | 3139 | 1/2-13 HEX NUT GR8 ZP | |
| 16 | 1 | 1691 | 1/2" LOCK WASHER | |
| 17 | 5 | ATU-259 | 1/2-13 X 2" H/H C/S GR. 8 ZP | |
| 18 | 1 | ATU-260 | 1/2-13 X 1.25 GR8 HEX BOLT | |
| 19 | 1 | ATU-881 | WHEELARM ASSY (ARM WELDMENT, CHANNEL, WHEEL) | |
| 19 | 1 | ATU-881-G | WHEELARM ASSY (ARM WELDMENT, CHANNEL, WHEEL), GALVANIZED | |
| 20 | 1 | ATU-882 | WHEELARM BASE WELDMENT | |
| 20 | 1 | ATU-882-G | WHEELARM BASE WELDMENT, GALVANIZED | |
| 21 | 1 | ATU-886 | WHEELARM CHANNEL | |
| 21 | 1 | ATU-886-G | WHEELARM CHANNEL, GALVANIZED | |
| 22 | 2 | A-132112 | 1/2-13 X 2.50 GR8 HEX BOLT | |
| 23 | 2 | A-132024 | 1/2-13 LOCKNUT | |
| 24 | 1 | A-132039 | 3/8-24 X 3" GRADE 8 BOLT | |
| 25 | 1 | 2184 | 3/8-24 LOCKNUT | |
| 26 | 1 | ATU-123 | WHEELARM WHEEL (INCL. NUT AND BOLT; A-132039 & 2184) |
9.1 Power Down Assembly
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 6 | A-132026 | 1/4" X 1-1/2" LG COTTER PIN, 18-8 SS | |
| 2 | 2 | ATU-102 | PIN, CYLINDER DEAD END MOUNT | |
| 3 | 2 | ATU-358 | 1/4"-20 x 2.0" H/C/S ZP | |
| 4 | 2 | ATU-359 | 1/4-20 TOP L/N GR. C ZP | |
| 5 | 2 | ATU-103 | PIN, LIFTFRAME CYLINDER MOUNT | |
| 6 | 2 | A-130392 | CLAMP, HYDRAULIC HOSE | |
| 7 | 2 | A-130100 | RESTRICTOR VALVE 1.50 GPM SAE | |
| 8 | 2 | A-130113 | CYLINDER 3" BORE X 10.75" STROKE, 2500# | |
| 8 | 2 | A-130114 | CYLINDER 4" BORE X 10.75" STROKE, 3300# | |
| 9 | 2 | A-130140 | FITTING: 90DEG ADAPTER (MALE SAE#6 TO MALE JIC#6) | |
| 10 | 2 | A-130142 | FITTING: 90DEG ELBOW (MALE JIC#6 TO FEMALE JIC#6) | |
| 11 | 2 | A-130153 | TEE FITTING: 06MJ-06MJ-06FJ | |
| 12 | 1 | A-130131 | HOSE - 30" LG., 3/8" ID | |
| 13 | 2 | A-130123 | HOSE - 36" LG., 3/8" ID | |
| 14 | 1 | A-130122 | HOSE - 44" LG., 3/8" ID |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
9.2 Gravity Down Assembly
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 6 | A-132026 | 1/4" X 1-1/2" LG COTTER PIN, 18-8 SS | |
| 2 | 2 | ATU-102 | PIN, CYLINDER DEAD END MOUNT | |
| 3 | 2 | ATU-358 | 1/4"-20 x 2.0" H/C/S ZP | |
| 4 | 2 | ATU-359 | 1/4-20 TOP L/N GR. C ZP | |
| 5 | 2 | ATU-103 | PIN, LIFTFRAME CYLINDER MOUNT | |
| 6 | 2 | A-130392 | CLAMP, HYDRAULIC HOSE | |
| 7 | 2 | A-130100 | RESTRICTOR VALVE 1.50 GPM SAE | |
| 8 | 2 | A-130113 | CYLINDER 3" BORE X 10.75" STROKE, 2500# | |
| 8 | 2 | A-130114 | CYLINDER 4" BORE X 10.75" STROKE, 3300# | |
| 9 | 2 | A-130329 | FITTING: HOSE BARB 06MORB TO 1/4 HOSE | |
| 10 | 4 | A-170260 | 7/32-5/8 SS HOSE CLAMP | |
| 11 | 70 | A-130071 | CLEAR PLASTIC HOSE, PER INCH (1/4") | |
| 12 | 1 | A-130030 | TEE FITTING BLOCK | |
| 13 | 3 | A-130198 | FITTING: 06MORB-06FJ STRAIGHT | |
| 14 | 2 | 2019 | 3/8"-16 X 1-3/4" H/H C/S GR8 YZP | |
| 15 | 2 | 2054 | 3/8 LOCK WASHER | |
| 16 | 1 | A-130036 | TEE FITTING: HOSE BARB | |
| 17 | 1 | A-130212 | HYDRAULIC HOSE W/FITTINGS | |
| 18 | 1 | A-130131 | HOSE - 30" LG., 3/8 ID | |
| 19 | 1 | A-130132 | HOSE - 42" LG., 3/8 ID |
10. Lift Frame
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | ATU-557 | HANDLE - LATCH | |
| 2 | 1 | ATU-556 | PIN LOCK - LATCH | |
| 3 | 1 | A-132342 | 1"-8 Gr.8 NYLOCK | |
| 4 | 1 | ATU-5206 | DCT ADJUSTMENT BOLT WELDMENT-GATE LATCH | |
| 5 | 1 | A-132337 | 1"-8 JAM NUT | |
| 6 | 1 | ATU-5025 | RADIUS ARM W/ BUSHINGS LH DCT w/ GATE LATCH | |
| 6 | 1 | ATU-5025-G | RADIUS ARM W/ BUSHINGS LH DCT w/ GATE LATCH, GALVANIZED | |
| 7 | 8 | A-132027 | 1/4" X 2-1/4" LG COTTER PIN, 18-8 SS | |
| 8 | 2 | ATU-5011 | PIN, LIFTFRAME TO ADAPTER | |
| 9 | 6 | ATU-428 | SERVICE FREE BUSHING 1.50 OD X 1.25 ID X 1.00 | |
| 10 | 8 | ATU-134 | 1-7/8" OD X 1-17/64" ID X 10 GA BUSHING | |
| 11 | 2 | ATU-5010 | PIN, RADIUS ARM TO ADAPTER | |
| 12 | 4 | 2029 | 1/4-20 FLANGED L/N ZP | |
| 13 | 4 | 2051 | 1/4" F/W ZP | |
| 14 | 4 | S-047004 | 1/4-20 X 1" SLOTTED RDHD M/S ZP | |
| 15 | 1 | ATU-5022 | RADIUS ARM W/ BUSHING RH DCT | |
| 15 | 1 | ATU-5022-G | RADIUS ARM W/ BUSHING RH DCT, GALVANIZED | |
| 16 | 2 | A-140090 | WEAR PAD/BUMPER | |
| 17 | 4 | ATU-426 | SERVICE FREE BUSHING 1.25 OD X 1.00 ID X 1.00 | |
| 18 | 4 | ATU-259 | 1/2-13 X 2" H/H C/S GR. 8 ZP | |
| 19 | 4 | A-132301 | 1/2-13 NYLOCK GR8 NUT ZP | |
| 20 | 1 | ATU-5163 | ICC BUMPER ATTACHMENT W/M DCT | |
| 21 | 1 | ATU-5007 | DCT LIFTFRAME WELDMENT | |
| 21 | 1 | ATU-5007-G | DCT LIFTFRAME WELDMENT, GALVANIZED |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
Parts table p17 (diagram p17)
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | ATU-120 | SOLENOID RELAY, 12VDC MOTOR RUN | |
| 2 | 1 | A-150018 | MOTOR, 12VDC, NO THERMAL SWITCH | |
| 3 | 1 | A-130216 | VALVE/12VDC COIL/CARTRIDGE COMBINATION (LOWER, SINGLE O-RING, GREEN WIRE) | |
| 4 | 2 | A-176315 | COIL ONLY, 12VDC | |
| 5 | 1 | A-130215 | VALVE/12VDC COIL/CARTRIDGE COMBINATION (RAISE, TRIPLE O-RING, RED WIRE) | |
| 6 | 1 | ATU-565 | RESERVOIR ATTACHMENT CLAMP | |
| 7 | 1 | A-150019 | RESERVOIR ATTACHMENT O-RING | |
| 8 | 2 | ATU-229 | GROMMET FOR PUMP BOX | |
| 9 | 1 | A-150546 | FILLER/VENT CAP | |
| 10 | 1 | A-150635 | RESERVOIR (INCLUDES FILLER/VENT CAP) |
Parts table p15 (diagram p16)
| Item | Qty | Part Number | Description | Actions |
|---|
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
i
11. Platform Assemblies
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | ATU-5026 | ALUMINUM PLATFORM ASSY- DCT 86"x 60" w/o CART STOPS | |
| 1 | 1 | ATU-5012 | ALUMINUM PLATFORM ASSY- DCT 86"x 60" CART STOPS | |
| 1 | 1 | ATU-5291 | ALUMINUM PLATFORM ASSY- DCT 86"x 60" LOW PROFILE CART STOPS | |
| 1 | 1 | ATU-5029 | ALUMINUM PLATFORM ASSY- DCT 86"x 50" CART STOPS | |
| 1 | 1 | ATU-5041 | ALUMINUM PLATFORM ASSY - 86X50 LOW PROFILE, w/o CARTSTOPS | |
| 1 | 1 | ATU-5064 | STEEL PLATFORM ASSY- DCT 86”x50” w/o CART STOPS | |
| 1 | 1 | ATU-5064-G | STEEL PLATFORM ASSY- DCT 86”x50” w/o CART STOPS, GALVANIZED | |
| 2 | 1 | ATU-5045 | MAIN PLATFORM WELDMENT, STEEL 86"x60" | |
| 2 | 1 | ATU-5045-G | MAIN PLATFORM WELDMENT, STEEL, GALVANIZED 86"x60" | |
| 2 | 1 | ATU-5148 | MAIN PLATFORM WELDMENT, STEEL, 86"x50" | |
| 2 | 1 | ATU-5148-G | MAIN PLATFORM WELDMENT, STEEL, GALVANIZED 86"x50" | |
| 2 | 1 | ATU-5013 | MAIN PLATFORM WELDMENT, ALUM 86"x60" | |
| 2 | 1 | ATU-5030 | MAIN PLATFORM WELDMENT, ALUM 86"x50" | |
| 3 | 1 | ATU-5056 | FLIP PLATFORM WELDMENT - STEEL, NO CARTSTOPS 86"x60" | |
| 3 | 1 | ATU-5056-G | FLIP PLATFORM WELDMENT - STEEL, NO CARTSTOPS 86"x60", GALVANIZED | |
| 3 | 1 | ATU-5226 | FLIP PLATFORM WELDMENT - STEEL, W/ CARTSTOPS 86"x50" | |
| 3 | 1 | ATU-5226-G | FLIP PLATFORM WELDMENT - STEEL, W/ CARTSTOPS 86"x50", GALVANIZED | |
| 3 | 1 | ATU-5015 | FLIP PLATFORM WELDMENT - ALUM, W/ CARTSTOPS 86"x60" | |
| 3 | 1 | ATU-5028 | FLIP PLATFORM WELDMENT - ALUM, NO CARTSTOPS 86"x60" | |
| 3 | 1 | ATU-5032 | FLIP PLATFORM WELDMENT - ALUM, W/ CARTSTOPS 86"x50" | |
| 3 | 1 | ATU-5042 | FLIP PLATFORM WELDMENT - ALUM, NO CARTSTOPS 86"x50" |
12. Main Platform
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 2 | A-140881 | PLATFORM PIN: ALUM DCT W/ LOBE COLLARS USED WITH ALUMINUM PLATFORM | |
| 1 | 2 | A-140606 | PLATFORM PIN : STEEL DCT W/ LOBE COLLARS USED WITH STEEL PLATFORM | |
| 2 | 2 | A-140090 | WEAR PAD/BUMPER | |
| 3 | 4 | A-150159 | SCREW, SELF DRILLING | |
| 4 | 4 | 2019 | 3/8"-16 X 1-3/4" H/H C/S GR8 YZP | |
| 5 | 4 | 2058 | 3/8 FLAT WASHER | |
| 6 | 4 | 2054 | 3/8 LOCK WASHER | |
| 7 | 4 | P-162 | 3/8"-16 HEX NUT GR8 YZP | |
| 8 | 1 | ATU-941 | CAM PLATE ASSY. LH - (4 3/4") RAMP RIDE | |
| 8 | 1 | ATU-941-G | CAM PLATE ASSY. LH - (4 3/4") RAMP RIDE, GALVANIZED | |
| 8 | 1 | ATU-5166 | CAM PLATE W/M LH- 5” RAMP RIDE | |
| 8 | 1 | ATU-5166-G | CAM PLATE W/M LH- 5” RAMP RIDE, GALVANIZED | |
| 8 | 1 | ATU-1349 | CAM - LEFT (SPECIAL) EXTREME RAMP RIDE | |
| 8 | 1 | ATU-1349-G | CAM - LEFT (SPECIAL) EXTREME RAMP RIDE, GALVANIZED | |
| 9 | 1 | ATU-518-L | PLATFORM SPRING - LH | |
| 10 | 2 | ATU-359 | 1/4-20 TOP L/N GR. C ZP | |
| 11 | 2 | ATU-1485 | CAM PLATE PIN | |
| 12 | 2 | ATU-358 | 1/4"-20 x 2.0" H/C/S ZP | |
| 13 | 4 | A-140839 | LOBE COLLAR WELDMENT | |
| 14 | 2 | ATU-247 | 3/8-16 X 1-1/4" C/S GR.8 ZP | |
| 15 | 6 | 2064 | 3/8-16 REVERSIBLE HEX L/N ZP | |
| 16 | 1 | ATU-518-R | PLATFORM SPRING - RH | |
| 17 | 1 | ATU-940 | CAM PLATE ASSY. RH - (4 3/4") RAMP RIDE | |
| 17 | 1 | ATU-940-G | CAM PLATE ASSY. RH - (4 3/4") RAMP RIDE, GALVANIZED | |
| 17 | 1 | ATU-5168 | CAM PLATE W/M RH- 5” RAMP RIDE | |
| 17 | 1 | ATU-5168-G | CAM PLATE W/M RH- 5” RAMP RIDE, GALVANIZED | |
| 17 | 1 | ATU-1348 | CAM - RIGHT (SPECIAL) EXTREME RAMP RIDE | |
| 17 | 1 | ATU-1348-G | CAM - RIGHT (SPECIAL) EXTREME RAMP RIDE, GALVANIZED | |
| 18 | 2 | A-132266 | 5/16-18 X 3" GRADE 8 HEX BOLT |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
12. Main Platform
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 19 | 6 | 862 | 5/16-18 LOCKNUT | |
| 20 | 4 | A-132148 | 5/16-18 X 2" S/H C/S, ALLOY, BLACK OXIDE | |
| 21 | 1 | ATU-926 | LATCH PIN | |
| 22 | 1 | ATU-929 | SPRING | |
| 23 | 2 | A-132276 | 3/8-16 X 1.75" FLATHEAD BOLT | |
| 24 | 3 | ATU-975 | SQUARE WASHER | |
| 25 | 1 | A-140292 | LATCHPLATE WELDMENT | |
| 26 | 1 | ATU-5250 | LATCHPLATE SPACER | |
| 27 | 4 | 6608 | 5/16-18 X 1" GRADE 8 HEX BOLT | |
| 28 | 4 | 6611 | 5/16" LOCK WASHER | |
| 29 | 1 | ATU-5271 | COVER PLATE | |
| 30 | 1 | ATU-5264 | SPRING, PLATFORM ASSIST - FLIP TO MAIN | |
| 31 | 1 | — | TYPICAL MAIN PLATFORM WELDMENT |
13. Flipover Platform
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | ATU-5237 | SPRING HOLDER | |
| 2 | 1 | A-132024 | 1/2-13 LOCKNUT | |
| 3 | 1 | ATU-5264 | SPRING, PLATFORM ASSIST - FLIP TO MAIN | |
| 4 | 4 | A-132331 | 1/2-13 X 1-1/2 FLAT HEAD SCREW | |
| 5 | 1 | ATU-5276 | PLATFORM HINGE WELDMENT-STREETSIDE | |
| 6 | 4 | 1691 | 1/2" LOCK WASHER | |
| 7 | 4 | ATU-259 | 1/2-13 X 2" H/H C/S GR. 8 ZP | |
| 8 | 1 | A-140366 | PLATFORM LATCH | |
| 9 | 1 | ATU-5251 | PLATFORM LATCH SPACER | |
| 10 | 1 | ATU-5184 | PLATFORM HINGE WELDMENT-CURBSIDE | |
| 11 | 1 | — | TYPICAL FLIPOVER PLATFORM WELDMENT |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
14. Serviceable Hardware
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 4 | ATU-428 | SERVICE FREE BUSHING 1.50 OD X 1.25 ID X 1.00 | |
| 2 | 2 | ATU-426 | SERVICE FREE BUSHING 1.25 OD X 1.00 ID X 1.00 | |
| 3 | 1 | ATU-518-L | PLATFORM SPRING - LH | |
| 4 | 1 | ATU-518-R | PLATFORM SPRING - RH | |
| 5 | 8 | A-132027 | 1/4" X 2-1/4" LG COTTER PIN, 18-8 SS | |
| 6 | 6 | A-132026 | 1/4" X 1-1/2" LG COTTER PIN, 18-8 SS | |
| 7 | 4 | A-132148 | 5/16-18 X 2" S/H C/S, ALLOY, BLACK OXIDE | |
| 8 | 4 | 862 | 5/16-18 LOCKNUT | |
| 9 | 2 | A-140881 | PLATFORM PIN: ALUM DCT W/ LOBE COLLARS USED WITH ALUMINUM PLATFORM | |
| 9 | 2 | A-140606 | PLATFORM PIN : STEEL DCT W/ LOBE COLLARS USED WITH STEEL PLATFORM | |
| 10 | 4 | ATU-358 | 1/4"-20 x 2.0" H/C/S ZP | |
| 11 | 4 | ATU-359 | 1/4-20 TOP L/N GR. C ZP | |
| 12 | 2 | ATU-103 | PIN, LIFTFRAME CYLINDER MOUNT | |
| 13 | 2 | ATU-1485 | CAM PLATE PIN | |
| 14 | 2 | ATU-5010 | PIN, RADIUS ARM TO ADAPTER | |
| 15 | 2 | ATU-5011 | PIN, LIFTFRAME TO ADAPTER | |
| 16 | 2 | ATU-102 | PIN, CYLINDER DEAD END MOUNT | |
| 17 | 8 | ATU-134 | 1-7/8" OD X 1-17/64" ID X 10 GA BUSHING |
15. Fuse Assembly and Miscellaneous Accessories
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
16. Safety and Instructional Decals
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | A-131115 | DECAL: WARNING - PERSONAL INJURY | |
| 2 | 1 | ATU-423 | DECAL: OPERATING INSTRUCTIONS | |
| 3 | A-150238 | DECAL: NOTICE OVERLOAD PROTECTION | ||
| 4 | 1 | ATU-141 | DECAL: AFTER USING LIFTGATE | |
| 5 | 1 | A-131061 | DECAL: 2500LB MAXIMUM CAPACITY | |
| 5 | 1 | A-131136 | DECAL: 3300LB MAXIMUM CAPACITY | |
| 6 | 1 | A-131017 | DECAL: NOTE - DISENGAGE LATCH | |
| 7 | 1 | A-131036 | DECAL: LOGO | |
| 8 | 1 | A-131133 | DECAL: FLUID TYPE | |
| 9 | 1 | A-150601 | DECAL: MADE IN USA | |
| 10 | 1 | A-131028 | DECAL: WELD WARNING | |
| 11 | A-131125 | DECAL: GALVANIZED METAL HAZARD | ||
| 12 | 1 | A-131001 | DECAL: 10A FUSE & HOLDER | |
| 13 | 1 | A-131036 | WIRE DECAL: WARNING - FUSE REPLACEMENT INSTRUCTIONS |
16.3 Decal / Installation Kits
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| — | 1 | ATU-5210 | DCT-25 DECAL KIT (2500LB CAPACITY) | |
| — | 1 | ATU-5210-A | DCT-25 DECAL KIT (ALUMINUM) (2500LB CAPACITY) | |
| — | 1 | L-801-IM | DCT INSTALLATION AND OPERATION MANUAL | |
| — | 1 | ATU-5211 | DCT-33 DECAL KIT (3300LB CAPACITY) | |
| — | 1 | ATU-5211-A | DCT-33 DECAL KIT (ALUMINUM) (3300LB CAPACITY) | |
| — | 1 | A-133063 | FUSE, 200A | |
| 1 | 1 | A-131115 | DECAL: WARNING - PERSONAL INJURY | |
| 2 | 1 | ATU-423 | DECAL: OPERATING INSTRUCTIONS | |
| 4 | 1 | ATU-141 | DECAL: AFTER USING LIFTGATE | |
| 5 | 1 | A-131061 | DECAL: 2500LB MAXIMUM CAPACITY | |
| 6 | 1 | A-131017 | DECAL: NOTE - DISENGAGE LATCH | |
| 10 | 1 | A-131028 | DECAL: WELD WARNING | |
| 13 | 1 | A-131036 | WIRE DECAL: WARNING - FUSE REPLACEMENT INSTRUCTIONS | |
| — | 6 | ATU-071 | LEVELING SHIM |
Reference Notice
Manual links are provided for reference only. If you have any doubt, contact us — we’re happy to verify parts and help you purchase with confidence.
Have your liftgate serial number ready for faster assistance. Where to find it
16.3 Decal / Installation Kits — DECAL/INSTALL KIT (3300 LB CAPACITY)
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| — | 1 | A-133063 | FUSE, 200A | |
| — | 1 | L-801-IM | DCT INSTALLATION AND OPERATION MANUAL | |
| 1 | 1 | A-131115 | DECAL: WARNING - PERSONAL INJURY | |
| 2 | 1 | ATU-423 | DECAL: OPERATING INSTRUCTIONS | |
| 4 | 1 | ATU-141 | DECAL: AFTER USING LIFTGATE | |
| 5 | 1 | A-131061 | DECAL: 2500LB MAXIMUM CAPACITY | |
| 6 | 1 | A-131017 | DECAL: NOTE - DISENGAGE LATCH | |
| 10 | 1 | A-131028 | DECAL: WELD WARNING | |
| 13 | 1 | A-131036 | WIRE DECAL: WARNING - FUSE REPLACEMENT INSTRUCTIONS | |
| — | 6 | ATU-071 | LEVELING SHIM |
16.4 Decal Only Kits — DECAL KIT ONLY (2500 LB CAPACITY)
| Item | Qty | Part Number | Description | Actions |
|---|---|---|---|---|
| 1 | 1 | A-131115 | DECAL: WARNING - PERSONAL INJURY | |
| 2 | 1 | ATU-423 | DECAL: OPERATING INSTRUCTIONS | |
| 4 | 1 | ATU-141 | DECAL: AFTER USING LIFTGATE | |
| 5 | 1 | A-131061 | DECAL: 2500LB MAXIMUM CAPACITY | |
| 6 | 1 | A-131017 | DECAL: NOTE - DISENGAGE LATCH | |
| 10 | 1 | A-131028 | DECAL: WELD WARNING | |
| 13 | 1 | A-131036 | WIRE DECAL: WARNING - FUSE REPLACEMENT INSTRUCTIONS |
Need help confirming the correct part?
Share model, serial, and item number.
Fast technical support
Use this after reviewing the diagram and table. We can verify compatibility before purchase.
Phone
(774) 266-8892Send your details and we will help identify the right replacement part.
Contact SupportImportant Diagram Notice
These diagrams are for reference only.
- Due to unintended occasional data alignment issues, a page table may differ slightly from the original OEM PDF.
- Please verify details against the original PDF file.
- Contact our team anytime for part number confirmation.
Reference mismatch detected