You need a liftgate and we can sell and ship it to your facility. We have a variety of the most popular makes and models, including Maxon Liftgates and Palfinger Liftgates from LiftGateMe, in stock and ready to ship.
Click here to get a liftgate quote now.
Information needed
We'll need a few bits of information to get started on your quote. ALL information below is needed to start a quote.
- Truck or Trailer
- Make, Model and Year of the vehicle
- Is it a 96 or 102 wide vehicle
- Clearance from ground to deck height
- If it's a trailer, are there swing doors?
- What capacity do you need? (Ranging from 2,000 to 6,600 lbs)
Common Questions
There are well over 100 makes and models of gates, plus more than 10 options per gate, that's over 1,000 combinations. We know there's a lot to think about when ordering, not to mention, it's a big financial commitment when purchasing, but we hope to settle a few main questions that have often.
How much does a liftgate cost?
The price of a liftgate varies widely depending on your specific needs. That said, since we get this question often from first timers, below are some basic prices to think about. This is as of 2018 with the price range given from a very basic model to a cadillac version. We do not currently disclose prices online for new gates since we believe that every customer is unique.
Light duty pickup liftgates can range from under $2,000 to $3,500.
Classic tuck under can range from $2,000 to $11,000.
Rail gates and column lift can range from $5,000 to $20,000 or more.
Again these are ball park estimates since we want to help you find the perfect gate to fit your needs.
Do you install liftgates?
Yes, yes, and definitely yes. We are a family fleet business based out of Boston, (The David Mullins Company), which performs full installs if you are in the area. From the most basic pickup lift to large column lifts for national accounts, we do it all.
For those who are not located in New England, we have a vast network of installer facilities coast to coast.
Installs vary depending on many factors. The most common will be, the type of gate purchased, if an existing gate needs to be taken off the vehicle, and how clean the back of the vehicle is.
Please let us know if an install is needed up front so that we can properly arrange an install.
Do you sell used gates?
We do not sell used gates unless our Massachusetts location installs them. That is because we want to keep our customers ecstatic about our service and what they purchase. If you purchase a new gate we really want you to know what you're getting. Since gates can last 30+ years, how "used" they are varies widely as do their operability so we simply do not do it unless we personally install it.
Can you put a liftgate on a truck or trailer?
In almost all cases yes.
There are some older models of Pickup Trucks (Pre-2000) which are not able to support liftgates because their bodies are simply too weak.
Click here to get a liftgate quote now.
Have a question? We'd love to hear from you.
No liftgate serial number? Click here for a visual guide to locate it, then contact us.
Recent Knowledge Share
Recent Knowledge Share
Waltco HLF Preventive Maintenance Guide: Routine Inspections for Long-Term Reliability
Proper liftgate maintenance is essential for keeping a tuck-under liftgate like the Waltco HLF operating safely, reliably, and with minimal downtime. Preventive maintenance focuses on routine inspections and scheduled service checks that identify wear, fluid issues, and safety concerns before they result in failures or unplanned repairs.This article outlines the factory-recommended preventive maintenance requirements for the Waltco HLF Series, including inspection intervals, structural and hydraulic checkpoints, lubrication requirements, and electrical system inspections. All guidance is sourced directly from official Waltco documentation and applies to HLF-25, HLF-30, HLF-40, and HLF-50 models.
How to Choose the Right Power Configuration for Your HLF Tuck Under Liftgate
The Waltco HLF tuck-under supports a wide range of power and electrical configurations tailored to both truck and trailer applications. Because HLF liftgates often see higher duty cycles, heavier capacities (up to 5,000 lbs), and more complex routing needs, choosing the right electrical setup is essential.
Waltco HLF Liftgate Operation Guide: Controls, Load Placement, and Storage
Operating a liftgate correctly is essential for protecting personnel, cargo, and equipment. The Waltco HLF flipaway (aka tuck-under style) liftgate is designed for loading and unloading cargo when operators follow the manufacturer’s instructions and posted decals.This guide is focused strictly on daily operation: control use, load placement, optional latch chain handling (if equipped), and storing the platform for transit.
Waltco HLF Flipaway Liftgate Overview: Structural Design and Capacity Ratings
The Waltco HLF is a flipaway (aka tuck under) liftgate designed around a folding platform and a hydraulic system that supports lifting and stowing cargo at the rear of trucks and trailers. This article explains what the HLF is, how it is built at a system level (platform, structure, and hydraulic architecture), and how capacity ratings are defined in Waltco documentation.